Technical Characteristics

Camaplast GRP laminates are made of basic elements such as fibreglass and resin.
The careful choice of all suppliers together with an “artisan” care of the product and more than 40 years of experience make our products to be at the top of the sector which concerns the GRP laminates.

The peculiar characteristics of those laminates are their resilience and – at the same time - their mechanical and chemical high resistance which make them unbeatable if compared to other plastic or metallic laminates.

From a commercial and technical point of view, Camaplast products are characterized by their fibreglass content per m² of laminate (for ex. a 375 means a product which contains 375g/m²S of fibreglass). That’s a value which defines both its mechanical resistance and – indirectly - its thickness.

The laminate surface can be with or without gelcoat, and also gloss or mat, smooth or sanded, rough with at sight-fibre and, on request, protected with a removable film.

The main characteristics of our products as well as some simple instructions for use are shown in the below charts.

For further information about the characteristics of each single product, see section Products.